Browse the online Catalog

Back to Catalog menu

Universal Smoke & Heat Removal Tool
Part # SOLO200
The Solo 200 is a universal detector removal tool suitable for use with the majority of detectors on today’s market.
Color coded tri-grips twist into place to create different size combinations. The combinations of the tri-grips enable removal/replacement of different size detectors, ensuring that one tool is all you will need.

Solo 200 has a universal joint ensuring that the tool remains parallel with the ceiling while in use, providing easy extraction and replacement – even on detectors that cannot be accessed from directly underneath.
• Ideal for most makes and types of detectors
• Allows removal/replacement of detectors at angles
• Adjustable for different sizes of detectors 

 

-------------------------------------------------------------------------------------------------------

Diaphragm for Solo 330 & 461
Part # CFSPARE105
Replacement Diaphragm for SOLO330 & SOLO461.

-------------------------------------------------------------------------------------------------------

Battery Baton for Heat Detector Tester
Part # SOLO720
Battery Baton for Heat Detector Tester 

-------------------------------------------------------------------------------------------------------

Heat Detector Tester - Head Only
Part # CFSOLO460
Heat Detector Tester - Head Only
See SOLO461 for Heat Detector Tester 

-------------------------------------------------------------------------------------------------------

Heat Detector Tester Kit
Part # CFSOLO461
The CFSOLO 461 provides a solution for testing heat detectors that is second to none. Its patented design is convenience itself, while offering the fastest functional test possible in the safest and most controlled way.

Features
• Height: Up to 10ft using SOLO101 pole (Sold Seperately) and SOLO 461. Up to 30ft using other
SOLO extension poles
• 50 tests of 30 secs duration per Battery BatonTM
• Heat is directed straight at the detector sensor.
• Sets 95% of all heat detector types into alarm within seconds.
• No cords - power from Battery Baton™ is delivered to unit via the frame.
• Infra-red beam is broken by detector to activate heat generation.
• Microprocessor control maintains constant heat and airflow with variations in battery voltage.
• Goes into standby after 120 secs of use for protection.
• Switches off completely after 5 minutes in standby for further protection.

Includes
• 1 x SOLO460 Cordless Heat Detector (SOLO101 pole for reach up to 10' sold seperately)
• 2 x SOLO720 Battery Batons™; and,
• 1 x fast charger (1 hr. recharge) SOLO725 (operates from 110 / 120V, AC supply or 12V DC car battery). 

-------------------------------------------------------------------------------------------------------

10 oz Smoke Detector Functional Testing Spray
Part # CFSOLOA4
SOLO™ SMOKE ALARM TEST AEROSOLS use a non-flammable, non-toxic, ozone friendly, low residue formula to provide UL Listed and Manufacturer endorsed simulated smoke. The SOLOA4 is designed to be used with the SOLO 330 smoke dispenser. It is NOT meant for handheld applications. The 10oz can allows for approximately 500-600 tests per can.

For handheld applications use the CHEKKIT.

Why Detectors Need to be Tested:
“ Detectors shall be tested in place to ensure smoke entry into the sensing
chamber and an alarm response... ”
Source: NFPA 72 1999 Table 7 - 2 . 2 (Test Methods) 13 . g .
“ Each smoke detector shall be tested for operation by introducing smoke or
simulated smoke to the detecting chamber ”
Source: CAN/ULC - S536-97 # 6 . 6 . 4 . 1 . 4 

-------------------------------------------------------------------------------------------------------

10.7oz Duster Canned Air
Part # CFSOLOA7
Solo Detector Duster is non-flammableis and is ideal to assist with the cleaning of detectors from debris that can collect on detector surfaces. This debris is one of the causes of detector drift in sensitivity and can possibly lead to detector false alarms, or in worse cases, a failure to alarm in a case of fire.

To clean the detector, simply remove the detector head at any height up to 30+ ft with the Solo 200 Removal Tool and blow the debris using Solo Detector Duster. 

-------------------------------------------------------------------------------------------------------

6 oz Smoke Detector Functional Testing Spray for Handheld Applications
Part # CFCHEKKIT
CHEKKIT SMOKE is a universal smoke detector testing aerosol specifically developed for hand-held use. CHEKKIT SMOKE meets or exceeds all the relevant Fire Industry Standards to provide an effective and consistent level of testing. It uses a non-flammable, non-toxic, ozone friendly, low residue formula to provide UL Listed and Manufacturer endorsed simulated smoke.

Why Detectors Need to be Tested:
“ Detectors shall be tested in place to ensure smoke entry into the sensing
chamber and an alarm response... ”
Source: NFPA 72 1999 Table 7 - 2 . 2 (Test Methods) 13 . g .
“ Each smoke detector shall be tested for operation by introducing smoke or
simulated smoke to the detecting chamber ”
Source: CAN/ULC - S536-97 # 6 . 6 . 4 . 1 . 4 

-------------------------------------------------------------------------------------------------------

Canned CO for Use on CO Detectors
Part # CFSOLOC3
Canned CO for use on CO Detectors for presence of fires. SOLOC3 is to be used with the SOLO 330 smoke dispenser. 

-------------------------------------------------------------------------------------------------------

Smoke & Heat Kit 30 ft (incl. 100,3-101,200,330,461,610)
Part # CFSOLO823KIT
A universal set for removing, replacing and testing of smoke and heat detectors up to 23ft, complete with carrying bag. This kit is supplied with the cordless heat tester.

Includes:
• 1 x Solo100 Fiberglass 4 Section Telescopic Pole 14.7ft
• 1 x Solo101 Fiberglass Extension Pole 3.7ft
• 1 x Solo200 Universal Detector Removal Tool
• 1 x Solo330 Aerosol Smoke Dispenser
• 1 x Solo461 Cordless Heat Detector Test Kit
• 1 x Solo610 Protective Carrying Bag 

-------------------------------------------------------------------------------------------------------

Starter Kit (101,330,1 can A4)
Part # CFSOLO810KIT
A universal set for removing, replacing and testing of smoke and heat detectors.

Includes:
• 1 x Solo101 3ft 7" fiberglass extension pole
• 1 x Solo330 Aerosol Smoke Dispenser
• 1 x SoloA4 10 oz Smoke Detector Functional Testing Spray 

-------------------------------------------------------------------------------------------------------

Functional Test Smoke Dispenser
Part # CFSOLO330
Lightweight, strong and simple to use, the SOLO330 has been truly designed for daily rigoros use.
The injection-moulded construction and swing frame of the Solo 330 make it the ideal tool for testing virtually all types and makes of modern smoke detectors at heights up to 30ft.

The Solo 330 has been ergonomically designed for optimum use with the specially formulated Solo Aerosol. Together they offer fully controlled and efficient testing. Just a short burst of the aerosol is all that is needed to activate smoke detectors.
• Durable – to withstand the rigors of everyday use
• Strength and durability of modern plastics optimized – to ensure long life
• Injection-moulded plastic design - minimizes weight
• Spring-loaded mechanism - enables effective, but economic, aerosol delivery
• Dispenser and patented diaphram contain particles – conserves aerosol
• Aerosol spray not directed at detector – sensor not swamped with particles
• Touch sensitive – ideal for testing detectors fitted to suspended ceilings
• Universal - suits most detectors fitted from ‘normal ceiling’ height up to 30ft
• Clear cup and diaphragm – allows view of the detector LED whilst testing
• Interchangeable with all other Solo tools
• Weight: 1 lb. 4 oz
• Detector sizes Up to approx. 3.9in (sensing chamber only needs to be sealed within the cup), For Larger Diameter Smoke Detectors Use SOLO332
• Working angle 0°, >90° max 

-------------------------------------------------------------------------------------------------------

Lead Acid Battery Tester
Part # CFCELLCHECKER
CELLCHECKER LEAD ACID PULSE LOAD BATTERY TESTER is the newest in battery testers, testing the battery’s performance – not just voltage or internal resistance, in 12-20 SECONDS not minutes. Tests 2, 4, 6 and all 12V (incl. 12V55, 12V72, etc.) alarm and emergency light batteries. Batteries only have to be tested one time. Requires 4 x AA Alkaline batteries NOT included.

• Ideal for maintenance of fire and security alarm systems
• LED indicates percentage of remaining battery capacity
• Accurate pulse load testing
• Fast Test Time – approximately 12-20 seconds
• Tests ability to deliver current & to maintain voltage under load
• Easy to Use
• Tests battery performance – not just voltage or internal resistance
• Battery Safe – does not damage or drain the battery
• Identifies weak or failing batteries
• Accurate results on new, partially discharged & stored batteries 

-------------------------------------------------------------------------------------------------------

Smoke detector sensitivity test kit (incl. SOLO100,TRUTEST801,Smoke400)
Part # CFTRUTEST800KIT
This kit includes:

TRUTEST801

Trutest is the most advanced in-situ smoke detector sensitivity tester available today. Trutest is the only universal smoke sensitivity tester that can provide an actual detector sensitivity reading in % / ft to UL 268 in one single measured test.

SOLO100
The Solo 100 lightweight telescopic pole extends from 4ft 2” to 14ft 7” in 4 sections allowing access to detectors fitted up to 20ft. A recommended maximum of 3 extension poles (PN#SOLO101) can be added to allow the user to reach up to 30+ ft.

The Kit also includes 12 x 9.5oz cans aerosol, UL listed, use with 801 only

AEROSOL NOT SHOWN IN PICTURE 

-------------------------------------------------------------------------------------------------------

Smoke Aerosol for Trutest
Part # CFSMOKE400
Environmentally friendly, non-flammable, non toxic aerosol to be used with Trutest system. 

-------------------------------------------------------------------------------------------------------

Universal Smoke Detector Sensitivity Tester
Part # CFTRUTEST801
Trutest is the most advanced in-situ smoke detector sensitivity tester available today. Trutest is the only universal smoke sensitivity tester that can provide an actual detector sensitivity reading in % / ft to UL 268 in one single measured test.

Trutest introduces a smoke test aerosol to the detector while still connected to the alarm system, utilising smoke obscuration sensing to measure and feedback information to a controlling microprocessor.

• Lightweight and truly portable
• One genuine test
• Universal - for ionisation, photoelectric, conventional and intelligent point detectors
• Displays sensitivity reading in % / ft on LCD screen
• Adheres to international standards
• UL listed

Lightweight, easily carried in one hand, simplicity itself to use, programable, expandable and universal.

Conventional systems have no facilities for self-testing and intelligent systems, often believed to be self testing, can be seriously misleading.

The only universal sensitivity test device, providing an actual detector sensitivity reading in % / ft correlated to UL 268 on a LCD screen - genuinely after just one test. Truly portable, battery powered (rechargeable) and lightweight. 

-------------------------------------------------------------------------------------------------------

120V AC Direct-Wire - Heat Sensor
Part # CFHD135F
• Heat Sensor– Alarm sounds if temperature reses above 135°F
• 9V Battery Backup (included)– Continuous protection in caseof power failure
• Test Button– Tests circuitry, horn and battery function
• Red LED – Flashes every 30-40 seconds to indicate that the smoke alarm is operating properly
• 120V AC Direct-Wire – Interconnects with up to 24 units, of which 18 can be initiating
• Quick Connect – Installs quickly with snap-on wire harness 

-------------------------------------------------------------------------------------------------------

Model 1235 - 120 VAC Ionization Smoke Detector
Part # CF1235
The 1235 ionization SMOKE DETECTOR is U.L.C. Listed & includes a test button, power on LED and a 85db alarm horn. You may interconnect up to 24 units in series. Comes with a five year limited warranty.
• Ionization Technology – Sensitive to fast flaming and other fires
• Test Button – Tests circuitry and verifies alarm operation
• Low Battery Indicator – Warning chirp sounds when battery needs replacement
• 120V AC Direct-Wire – Interconnects with up to 24 units, of which 18 can be initiating
• Quick Connect – Installs quickly with snap-on wire harness 

-------------------------------------------------------------------------------------------------------

Model PE120 - 120 VAC Photoelectric Smoke Detector
Part # CFPE120
The PE120 photoelectric SMOKE DETECTOR is U.L.C. Listed, includes a test button, power on LED and an 85db alarm horn. You may interconnect up to 24 units of the same model in series. Comes with a 5 year limited warranty. A Relay Module is required for interconnecting.
• Photoelectric Technology– Sensitive to slow smouldering and other fires
• Test Button – Tests circuitry and verifies alarm operation
• Low Battery Indicator– Warning chirp sounds when battery needs replacement
• 120V AC Direct-Wire – Interconnects with up to 24 units, of which 18 can be initiating
• 9V Battery Backup (included) – Continuous protection in caseof power failure
• Quick Connect – Installs quickly with snap-on wire harness 

-------------------------------------------------------------------------------------------------------

Model 102 - Smoke, Fire and Carbon Monoxide Detector
Part # CF102
This alarm includes a voice warning system that announces "Fire, Carbon Monoxide, Low Battery". The talking alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement.

• Talking Alarm - Voice messages with sounding alarm identify different dangers
• Battery Powered – AA batteries included. Easy installation - no wiring required
• Hush® Button - Quickly silences nuisance alarms
• Ionization Technology - Sensitive to fast flaming and other fires
• Test/Rest Button - Test circuitry and resets alarm
• 2-in-1 unit – Advanced sensors for detecting both smoke and CO
• 5 year limited warranty
• U.L.C. listed 

 

-------------------------------------------------------------------------------------------------------

Model 9CO5 - Battery Operated
Part # 9CO5
This U.L.C. listed battery operated carbon monoxide includes multiple mounting options allowing installation on a wall or table top. Battery power ensures continuous protection even during power outages. Provides for early warning of carbon monoxide with no sensor replacement required.

• Snap Open Cover
• Test/Reset Button
• Loud 85dB Alarm
• Low Battery Warning
• Electrochemical sensor "The World's Most Accurate Sensor"
• U.L.C. listed
• Five year limited warranty 

-------------------------------------------------------------------------------------------------------

Model KNCOPP3 - Nighthawk 120 VAC Direct Plug in Cord Unit
Part # CFKNCOPP3
This Carbon Monoxide Alarm offers digital display allowing easy viewing of carbon monoxide levels. Its 9V battery back up provides you and your family protection even during power outages. Features a hide-a-way cord that allows for multiple installation possibilities.

• Danger Level Digital LED Display
• 9V Battery back up
• Hide-a-way cord
• Test/Reset Button
• Loud 85dB Alarm
• Low Battery Warning
• Easy Installation
• Electrochemical sensor "The World's Most Accurate Sensor"
• ULC / CSA / CANCGA approved
• 5 year limited warranty 

 

-------------------------------------------------------------------------------------------------------

Smoke Alarm Guard
Part # CFSDG
Smoke Alarm Guard for protection against vandalism and theft. Prohibits battery removal that would disable the smoke alarm.

• 3⅝" H x 7⅝" Dia 

-------------------------------------------------------------------------------------------------------

Kidde adapter to allow replacement of Firex unit
Part # CF9000172
• Each packaged set contains one model KA-F and one KA-FG
• Compatability– Allows the installation of a new Kidde alarm to replace an existing installed Firex® unit.
• Easy Installation - Attaches quickly to existing Firex ® wiring harness.
• Eliminates the need for rewiring 

-------------------------------------------------------------------------------------------------------

120V AC Direct-Wire - Carbon Monoxide Relay Module
Part #CFCO120X
For use with all interconnected installations – For use with all interconnected installations that contain CO alarms and smoke / CO combo units. Activates or deactivates auxiliary devices such as bells, lights and ventilation systems. 

-------------------------------------------------------------------------------------------------------

Sound Level Meter
Part # CFDBCHECKER
dbCHECKER sound level meter is ideal for testing audible appliances for the public operation mode of an emergency voice / alarm system in accordance with manufacturer's instructions. Meets requirements of NFPA 72 by meeting ANSI S1.42. 32 dB to 130 dB at frequencies between 31.5 Hz and 8 Hz. 

-------------------------------------------------------------------------------------------------------

Duct Detector Test Tool
Part # CFDUCTCHECKER
DUCTCHECKER test tool is the ideal device for annual testing to ensure that the duct detector will sample the airstream properly as required by NFPA 72 Chapter 10 (10.4.2.2 14 g(4)), and according to manufacturer’s instructions. Includes hard case and sampling tube plugs. 

 


Copyright © Canada Fire Equipment Company Inc., 2008.
Site by Ievo